Actis

Actis IoT devices are designed for operability. Previously configured orders can be implemented to increase the capacity and reach of these products.

Actis One / Actis Plus

The Actis One and Actis Plus nodes can control lighting equipped with either 1-10V controllers or the DALI communication protocol, which integrate the specifications of each luminaire (voltage and current). The smaller Actis Plus was specifically designed to be installed inside luminaires.

Features

  • Control via DALI protocol or 1-10V signals.
  • Real-time counter for maintenance for pre-set control profiles. Integrated astronomical clock.
  • Configurable deviation alarms according to reference thresholds. Internal temperature sensors.
  • Wireless communication via LoRaWAN RF. External antenna.
  • Measure of electrical specifications: voltage, current, energy, power factor, active and reactive power (Actis Plus).
  • Relay output and ON/OFF control of lighting (Actis Plus and optional for Actis One).

Cases studies

  • Cities:
    • Individualized control of each luminaire adapted to profile.
  • Industries:
    • Efficient control of lighting.
  • Agro:
    • Efficient control of ground lights.
  • Security:
    • Panic mode activation.

Technical Specifications

GeneralLoRaWAN EuropeLoRaWAN USALoRaWAN Australia
Frequency band868 MHz915 MHz915 MHz
TX power14dBm19dBm19dBm
Rx sensitivity-137dBm-130dBm-130dBm
CompatibilityLoRaWAN 1.0.2
ClassA / C
Dimensions108.47 mm & 80.79 mm
Power consumption< 1 W
Voltage range100-230 VAC 50/60 Hz
Max voltage250 VAC
Housing materialABS
Weight125 gr
Operating temperature-20ª to 66ª C
IP protection ratingIP-66
Maximum lamp load4A
Electrical measurementsW, vaar, PF, Hz, VLL, VLN, A, PF, kWh and kvarh (ACTIS PLUS)
On/off operating modesInternal astronomical clock
Dimming interface0-10 V & DALI
AntennaExternal antenna
AlarmsTemperature, voltage, current diversion
OutputRelay output, luminaire on/off control (ACTIS PLUS)

Actis Plus Nema 7 Edition

The Actis Plus Nema 7th Edition node is the point-to-point node of our WeLight solution and controls lighting equipped with 1-10V controllers or a DALI communication protocol, which integrates the electrical specifications of each luminaire (voltage and intensity). This node has a simple and fast external connection system to the luminaire via the Nema 7 interface. The Actis Plus Nema 7 implements a fail-safe mode in which a node installed outside the luminaire is switched on and managed by the external device.

Features

  • Control via DALI protocol or 1-10V signals.
  • Relay output and ON/OFF controls.
  • Real-time counter for maintenance of pre-set control profiles.
  • Integrated astronomical clock.
  • Measure of electrical specifications: voltage, current, energy, power factor, active and reactive power.
  • Configurable deviation alarms according to reference thresholds.
  • Internal temperature sensors.
  • Wireless communication via LoRaWAN RF.
  • Integrated photocell.

Cases studies

  • Cities:
    • Individualized control of each luminaire adapted to profile.

Technical Specifications

GeneralLoRaWAN EuropeLoRaWAN USALoRaWAN Australia
Frequency band868 MHz915 MHzAU915 MHz
TX Power14dBm19dBm19dBm
RX sensitivity-137dBm-130dBm-130dBm
CompatibilityLoRaWAN 1.0.2
ClassA & C
ConnectorNEMA 7
Application
108-32125 ANSI C136.41-2013
Dimensiones98 mm tall & 76 mm wide
Power consumption< 1 W
Voltage range100-230 VAC 50/60 Hz
Max Voltage250 VAC
Housing colorBase (black) - cover (transparent black)
Housing materialBase (94 V0) - cover (polycarbonate)
Weight180 gr
Operating temperature-20ª to 66ª C
IP protection ratingIP-66
Maximun lamp load4A
Electrical measurementsW, vaar, PF, Hz, VLL, VLN, A, PF, kWh and kvarh
On/off operating modesInternal astronomical clock - photocell
Dimming interface0-10 V & DALI
AntennaInternal antenna
AlarmsTemperature, voltage, current diversion

Does your IoT project require cutting-edge technology?

CONTACT US